Globe 3 Way Control Valve Series-130

Globe 3 Way Series-130 – Technical Specifications

DESIGN ASME B16.34
BODY DESIGN Globe type with Tail piece to provide third port.
VALVE SIZE 15 to 300 mm ( 1/2” to 12”)
RATING ANSI 150 to 600 Equivalents to BS, DIN, IS, JIS, etc.
END CONNECTION Flanged – 15mm to 300mm ( 1/2” to 12” )
Screwed – 15mm to 50mm ( 1/2” to 2” )
BODY MATERIALS Carbon Steel, Chrome-moly Steel, Stainless Steel,
Monel, Alloy20, Hastelloy B/C, Duplex Stainless
Steel, Aluminum Bronze, etc.
BONNET Standard upto 250°C
Normalizing (Finned) between 250°C to 500°C
Extended cold service – 20°C to – 100°C
Cryogenic-100ºC to -250ºC
Bellowsseals.
GLAND PACKING Grafoil , PTFE V Rings, Low Emission
TRIM DESIGNS Skirt Guided. Linear, Pressure Balance.
TRIM MATERIALS Stainless Steel, Alloy20, Monel, Duplex Stainless Steel,13% Chrome Steel, Hastelloy B/C, Stellite (Alloy 6 )
CHARACTERISTICS Linear, On / Off.
SEAT LEAKAGE As per FCI-70-2 (ANSI B 16.104)
Class IV, V and VI (STANDARD LEAKAGE RATES )
Metal to Soft Seating – Bubble tight (Zero Leakage)
ACTUATOR TYPE Diaphragm, Piston or Electric.
ACTUATOR ACTION Direct / Reverse Acting.
Direct acting air failure "Close" Top Port.
Reverse acting air failure "Opens" Top Port.
DIAPHRAGM Nitrile / Neoprene.(Nylon reinforced)
SPRING RANGES 3 – 15 PSIG ( 0.2 – 1.0 Kg/cm² )
6 – 30 PSIG ( 0.4 – 2.0 Kg/cm² )
AIR SUPPLY 20 – 35 PSIG (1.4 – 2.5 Kg/cm² )
AIR CONNECTION 1/ 4” or 1/ 2” NPT
ACCESSORIES Valve Positioner – Pneumatic , Electro Pneumatic, Smart Positioner.
Instruments-
Airset, Solenoid Valve, Air Lock, Volume Booster, Position Transmitter, Limit– Proximity Switches etc.
Features-
Top or Side Mounted handwheel, Limit Stops
Removable Blind Head, Steam Jacketing, etc.

Globe 3 Way Series-130 – Design Features

  • High flow Valve capacity and rangeability.
  • Heavy – Duty stem.
  • Wide range of interchangeable trim sizes.
  • Bellow seals available for positive stem sealing.
  • Comprehensively designed and tested to ensure its optimum performance for the tough process parameters specified.
  • Wide selection of actuator.

Quality And Performance Guarantee

  • Produced with Quality Systems accredited to ISO 9001: 2008
  • “CE” in accordance with Pressure Equipments Directive and Regulations By Lloyd’s Register.
  • Full material certification available for all major component Parts.
  • Full guarantee on design and Performance.
  • All testing performed to the requirements of ANSI B16.34.