Power Cylinder

Power Cylinder – Specifications

DESIGN Piston Double Acting Cylinder
CYLINDER BORE 2” to 14”
STROKE Upto 20” Standard. Higher sizes on request
BARREL MATERIAL Seamless Honed and Hard Chrome Plated
PISTON ROD MATERIAL EN8 Ground & Hard Chrome Plated
END CAPS MATERIAL C. I.
SEALS MATERIAL Nitrile
WORKING PRESSURE 150 psig (11 Kg/cm²g) Maximum
TEMPERATURE RANGE -20°C to +80°C
SENSITIVITY 0.5 % of full stroke
CONTROL SIGNAL PRESSURE RANGE 3-15 psi (0.2-1.0 Kg/cm²g)
AIR CONSUMPTION 1 SCFM of free air at 80 psig (5.6 kg/cm²g)
THRUST Available thrust may be considered as 70% of Cylinder Bore Area multiplied by operating air pressure.
PISTON POSITION

RELATIONSHIP

Linear
CONNECTION 1/4” NPT(F)/ 1/4 ” BSP (F)
ACCESSORIES

OPTIONAL

Pneumatic Valve Positioner,

Electro Pneumatic Valve Positioner,

Smart Positioner,

Air Filter Pressure Regulator,

Air Lock,

Solenoid Valve,

Volume Booster,

I/P Converter,

Position,

Transmitter etc

Power Cylinder – Design Features

  • Wide range available to meet most requirements.
  • Reversal of piston direction in relation to the Control Signal easily achieved on site.
  • Finish Cylinder barrel and piston rod.
  • Low friction and long life.

Quality And Performance Guarantee

  • Produced with Quality Systems accredited to ISO 900 1 : 2000 ( Certificate No. 208920.) by Bureau Veritas.
  • Full material certification available for all major component Parts.
  • Full guarantee on design and Performance.