FLUSH BOTTOM VALVE – SERIES 500

Flush Bottom Valves are used in piping, reactors & vessels to drain out Liquids, Abrasive, Slurry, Viscous Material or Semi Solid Media. Flush Bottom Valves are Available in design of Disc opening into the Tank (Vessel Opening Design) & Disc Lowering (Inside Valve Opening Design) into the Valve Body. Flush Bottom Valves with disc opening into the tank or opening upwards is the most commonly used. It is used where enough space is available between Bottom pad and the stirrer of the tank. The mass load inside the tank helps closing & tight shut off the Flush Bottom Valve. Normally,the inlet size of a standard flush bottom valve is one size higher than that of the outlet size. There are special constructiona possible with both sizes same. The outlet port is at an angle to the inlet port.Normally 45 or 60 degree deviation is provided. The end connection are normally flanged.