Power Cylinder

HOME/Power Cylinder

POWER CYLINDER

The PNEUCON Power Cylinders are widely used for accurately and positively positioning all types of plant regulators such as Dampers, ID and FD. fans in Boilers, Throttle Valves and Butterfly Valves.

Power Cylinder can be arranged so that increase in control pressure moves the position either outwards or inwards
ENQUIRE NOW
DOWNLOAD NOW
DESIGN Piston Double Acting Cylinder
CYLINDER BORE 2” to 14”
STROKE Upto 20” Standard. Higher sizes on request
BARREL MATERIAL Seamless Honed and Hard Chrome Plated
PISTON ROD MATERIAL EN8 Ground & Hard Chrome Plated
END CAPS MATERIAL C. I.
SEALS MATERIAL Nitrile
WORKING PRESSURE 150 psig (11 Kg/cm²g) Maximum
TEMPERATURE RANGE -20°C to +80°C
SENSITIVITY 0.5 % of full stroke
CONTROL SIGNAL PRESSURE RANGE 3-15 psi (0.2-1.0 Kg/cm²g)
AIR CONSUMPTION 1 SCFM of free air at 80 psig (5.6 kg/cm²g)
THRUST Available thrust may be considered as 70% of Cylinder Bore Area multiplied by operating air pressure.
PISTON POSITION

RELATIONSHIP

 Linear
CONNECTION 1/4” NPT(F)/ 1/4 ” BSP (F)
ACCESSORIES

OPTIONAL

 Pneumatic Valve Positioner,

Electro Pneumatic Valve Positioner,

Smart Positioner,

Air Filter Pressure Regulator,

Air Lock,

Solenoid Valve,

Volume Booster,

I/P Converter,

Position,

Transmitter etc
  • Wide range available to meet most requirements.
  • Reversal of piston direction in relation to the Control Signal easily achieved on site.
  • Finish Cylinder barrel and piston rod.
  • Low friction and long life.
  • Produced with Quality Systems accredited to ISO 900 1 : 2000 ( Certificate No. 208920.) by Bureau Veritas.
  • Full material certification available for all major component Parts.
  • Full guarantee on design and Performance.